Table of Contents
Advertisement
Less than
3 mm
ADF lever
Automatic document
feeder (ADF)
5 – 6
NOTICE: Paper should be straightened to fit the condition below.
More than
30 mm
Feed direction
Read surface
Top of the paper
2
Switch the paper select lever.
Switch the lever in the following procedures:
• Open the automatic document feeder (ADF) while lifting up
the ADF lever.
• Set the paper select lever.
Plain paper: "NORMAL"
Heavy paper: "THICK"
• Reset the ADF. (Check that the ADF lever is set at the "NOR-
MAL" position.)
NOTICE: Always reset the paper select lever to "NORMAL" posi-
tion, unless you feed the thick paper.
Paper select lever
(THICK mode)
(NORMAL mode)
Section A enlargerd
More than
30 mm
Feed direction
Less than
5 mm
Top of the paper
ADF frame
Read surface
Advertisement
Table of Contents
