Chapter 7 - Quick*View; Quick*View Demonstration Software Instructions; Setting Up The Imager And The Quick*View Software; Installing Quick*View From The Web - Hand Held Products 4410, 4710 User Manual

7
Quick*View

Quick*View Demonstration Software Instructions

Quick*View is a Microsoft Windows® program that displays decoded symbol
messages and captures images (for instance, ID photographs) from the
IMAGETEAM 4410/4710 Imager. Bar code information and images are
displayed in the Quick*View window.

Setting Up the Imager and the Quick*View Software

1. Connect the Imager to the PC's com port (com port 1 or com port 2) via the
appropriate interface cable (see "Unpacking the Imager" on page 1-2).Con-
nect the appropriate power supply to the Imager. (The Imager cannot get its
power from the PC's com port.)
For Microsoft Windows 95 or NT 4.0
2. Insert the Quick*View diskette labelled "32 Bit Release" into Drive A or B.
3. From the Start Menu, click on Run. Type "x:\setup" in the command line
box, where "x" represents a drive letter, typically "A" for the 3.5" floppy drive
on most PCs. Click on OK.
4. Follow the instructions in the setup screens.
5. To start the Quick*View program, from the Start Menu click on Programs,
Quickview, QuickView (32 Bit).

Installing Quick*View from the Web

1. Access the Hand Held Products web site at www.handheld.com.
2. Click in the Quick Search text box and enter Quick*View.
3. Click on Search Now.
4. Click on the entry for Quick*View.
5. When prompted, select Save File, and save the files to the
c:\windows\temp directory.
6. Once you have finished downloading the file, exit the web site.
7. Using Explorer, go to the c:\windows\temp file.
8. Double click on the Quickview.exe file. Follow the screen prompts to install
the Quick*View program.
9. To start Quick*View, from the Start Menu click on Programs, Quick*View,
Quick*View.
IMAGETEAM™ 4410/4710 User's Guide 7 - 1