Before Installing The En4093R; Recording Important Product Information - Lenovo Flex System Fabric EN4093R User Manual

Before Installing the EN4093R

Recording Important Product Information

© Copyright 2015 Lenovo
Attention: Product information is required in order to register your EN4093R,
update its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the EN4093R
is installed. To prevent the need to remove the switch in order to read required
product information, locate and record the information shown on
prior to installation.
An example of the product information labels is shown as follows:
Figure 3. Sample product labels from the switch
Note: These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the EN4093R contain the serial number and part number
of the switch. These labels also include the Media Access Control (MAC) address
(on the uppermost handle) of the switch. Though helpful, the MAC address is not
required for opening a service call.
Chapter 2: Installing and Removing the EN4093R
Table 1 on page 16
15