Honeywell evohome Installation Manual page 33

P31
evohome Installation Guide
Battery Powered Wireless Devices
Battery powered devices need to be put into
test mode to send and receive a test signal:
Radiator Controller (HR92)
Press the button, the zone name is displayed
1
Press and hold the
2
Turn the dial to display TEST
3
Press the button
4
The Central Controller will display the signal strength
(poor to excellent) and the Radiator Controller will
display a signal strength bar and a rating from 1 (poor)
to 5 (excellent) – 0 means the Radiator Controller has
not received a test signal from the Central Controller.
To exit test mode turn the dial to exit and press the
5
button. It will exit automatically after 10 minutes.
1 2
button again for 5 seconds
3 4