Honeywell evohome Installation Manual page 40

P38
Parameters and control features
Configuration and modification
Once you've completed these steps you're ready to
start using evo. The user guide gives you instructions for
personalising the settings on the Central Controller.
You can also make parameter adjustments on your Central
Controller to match the exact requirements of the heating
system. These can be found in the Installer Menu.
On the Central Controller press and
1
hold 'Settings' for 3 seconds
Press the green tick
2
Press PARAMETER SETTINGS and choose
3
the parameter you want to adjust:
– Internal Sensor Offset
– Cycle Rate
– Minimum On Time
– Fail Safe
– Optimisation
– Hot Water Parameters
For more details on parameters visit
www.evohome.honeywell.com