P23
evohome Installation Guide
To bind the actuator
Press the bind button on the Radiator Controller (if
6
there are multiple HR80's in the zone, do this to all of
them). The screen should show a flashing RF icon
On the Central Controller press the green bind button
7
Check that (all) the Radiator Controllers display SYNC.
8
If a Radiator Controller does not display SYNC and
the flashing RF icon
Central Controller and send the bind signal again
Press the next arrow on the Central Controller
9
Press the green tick
10
to the zone — OR — Press the red cross
don't need to add another radiator to the zone
remains, press back on the
to add another radiator
if you