Section 1 Nfn Gateway Overview; Product Description - Honeywell NOTIFIER ONYXWorks NFN Gateway Installation & Operation Manual

Section 1 NFN Gateway Overview

1.1 Product Description

This gateway:
• Serves as a bridge between an ONYXWorks
network.
• It uses the Workstation as the primary reporting station for the NFN network.
• Translates a NFN network's panel and device data into data that can be interpreted by the
ONYXWorks
• Monitors NFN networks using ARCNET network architecture.
• Is configured using the NFN Config Tool.
The NFN Gateway software application resides on a PC board assembly that is installed inside a
CAB-3/4 series cabinet. It communicates with any ONYXWorks
application or F
The NFN Gateway acts like any other node on a NFN network and is compatible with the following
node types. An * indicates panels that support using a USB or serial cable for the direct
connections.
NFN Gateway Installation & Operation Manual - P/N: 52306:Rev: D 06/01/07
®
Workstation software application or F
V ™ on the system via an IP connection over Ethernet networks.
IRST ISION
Table 1.1 NFN Compatibility Table
NFN Node Type
AFP-200
AFP-300/400
AFP-1010
AM2020
BACnet Gateway
BACnet Gateway-2
DAA
DVC
NFS-320*
NFS-640
NFS2-640*
NFS-3030
NFS2-3030*
NFN Web Server
NFN Web Server-2
NCA
NCA-2*
NCS
®
Workstation or F V
IRST ISION
V ™.
IRST ISION
®
Workstation software
Network Board Used
NAM
NAM
SIB-NET
SIB-NET
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
NCM-W/F
™ and a NFN
7