Honeywell evohome Installation Manual page 8

P6
Wireless Cylinder Thermostat (CS92) continued
Step 1: Wire up the heating system
To fit the CS92 Insertion Sensor
Fit in the cylinder immersion well with suitable fittings
1
to provide strain relief and prevent accidental removal
If the sensor doesn't fit tightly in the immersion
2
well fill the space with heat-conductive compound
to ensure maximum heat transfer
Install the CS92 Transceiver in a suitable location
3
close enough for the cable from the sensor to reach
Connect the cable from the sensor to the CS92 Transceiver
4
Wire to CS92 Transceiver
4
A x B y C
A x B y C