Step 4 - Check The Power Cord; Step 5 - Check The Compatibility Matrix - Exabyte EXB-8205 Owner's Manual

Installation
Additional accessory kit items
Both the internal and external accessory kits also include the following:
One EXATAPE™ 8mm
Data Cartridge
* 112m for the EXB-8205 and
EXB-8505; 160m XL for the
EXB-8205XL and EXB-8505XL
Step 4 – Check the power cord
The accessory kit includes a three-conductor power cord for connecting
the tape drive to a power source. If a power cord is not included or is
inappropriate for your power connection requirements, contact your
dealer or Exabyte Sales Support for assistance (see page 61).
Step 5 – Check the Compatibility Matrix
The tape drive must be compatible with your computer and the
application software you plan to use.
To make sure that they are compatible, check the Compatibility Matrix
included in your accessory box. If the Compatibility Matrix indicates that
your tape drive is not compatible with your application software, contact
your dealer for assistance. With your dealer's assistance you may be able
to make the components compatible by changing the tape drive's
internal instructions (firmware).
14
*
Note: If your dealer asks for the firmware version currently
stored in the tape drive, check the configuration label.
The numbers for the FECODE and EECODE indicate
the firmware version. Refer to the following illustrations
for the location of the label.
Compatibility Matrix
Warranty Card
Accessory Guide
*
* U.S. and Canada only
EXB–8205 and EXB–8505