Preparing For Installation; Step 1 - Ensure Esd Protection - Exabyte EXB-8205 Owner's Manual

Installation

Preparing for installation

To prepare for installation, follow the steps in this section.
Step 1 – Ensure ESD protection
If you are installing an internal tape drive, follow these procedures to
protect the tape drive from electrostatic discharge (ESD):
o
Turn off all devices attached to your computer, then turn off your
computer.
o
Disconnect all power cables from your computer and attached devices
before starting the installation.
o
If possible, use an antistatic mat and grounded static protection
wristband. If a mat and wristband are unavailable, touch a known
grounded surface (such as your computer's metal chassis) to discharge
static electricity from your body before handling the tape drive.
o
Limit your movement. Movement can cause static electricity to build
up around you.
12
Step Procedure
1 Ensure ESD protection
2 Unpack the tape drive and save the packing materials
3 Check the tape drive accessories
4 Check the power cord
Check the Compatibility Matrix
5
6 Register your tape drive
7 Set up your system
EXB–8205 and EXB–8505