Loading A Data Cartridge - Exabyte EXB-8205 Owner's Manual

8 mm tape drives, for standard and extended-length configurations

Hide thumbs Also See for EXB-8205:

Table of Contents

Operating the tape drive

Loading a data cartridge

To load a data cartridge into the tape drive, follow these steps:

1. Make sure that the write-protect switch has been set correctly for

2. If you have just powered on the tape drive, be sure that the bottom

3. Gently push the data cartridge into the tape drive, as shown, until

the desired operation, as explained on page 45.

and top LEDs are off, indicating that the tape drive has passed its

power-on self-test and is ready to load the data cartridge.

the load mechanism pulls the data cartridge into the tape drive.

EXB–8205 and EXB–8505

Table of Contents

Do you have a question about the EXB-8205 and is the answer not in the manual?

Exb-8505