Unpacking; Installation & Placement - moon 860A Evolution Series Owner's Manual

Dual-mono power amplifier
Hide thumbs Also See for 860A Evolution Series:
Table of Contents

Advertisement

Owner's Manual

Unpacking

The MOON 860A should be removed from its box with care.
The following accessories should be included inside the box with your power amplifier:
AC power cable
This owner's manual
Warranty and product registration information
Once the 860A is unpacked, inspect it thoroughly and report any damage to your dealer immediately. We suggest
that you keep all of the original packaging, storing it in a safe, dry place in case you're required to transport this
product. The customized packaging is specially designed to protect the 860A from any potential damage during
transit.
Please write the serial number of your new MOON 860A in the space provided below for future reference.
Installation & Placement
TThe MOON 860A Dual-Mono power amplifier is both
powerful and heavy. It requires reasonable ventilation
to maintain an optimum and consistent operating
temperature, especially since it will radiate heat when
driven hard. Consequently, it should be placed in a
location with empty space around it for proper heat
dissipation. You should never place another component
on top of this amplifier. As well, the amplifier should be
placed on a solid level surface. You should avoid placing
it near a heat source or inside a closed cabinet that is
not well ventilated as this could compromise the
amplifier's performance and reliability. The 860A uses
two large toroidal transformers in its power supply;
even though they are well shielded, you should not
place this amplifier too close to source components
Serial Number
(USA and Canada only)
sensitive to EMI, such as turntables, phono preamplifiers
and CD Players.
If the surface you have chosen isn't perfectly level, each
of the four (4) cones of your 860A are height adjustable;
carefully using your fingers, you can either raise each
leg by turning the cone underneath clockwise, or lower
each leg by turning it counterclockwise.
We strongly recommend that you leave these cones
mounted to the component at all times for reasons
related to both performance and aesthetics.
7

Advertisement

Table of Contents
loading

Table of Contents