Bridged-Mono Operation - moon 860A Evolution Series Owner's Manual

Bridged-Mono Operation

Figure 3: Bridged-Mono operation of the MOON 860A Dual-Mono Amplifier
If wish to operate the MOON 860A Dual-Mono Power
Amplifier as a monoblock amplifier, it can be converted
to bridged mode without any complex modifications.
Only a Simaudio XLR-BRIDGE Y-cable is required. This
custom cable will allow one input signal to be sent to
both channels of the amplifier's inputs, as pictured
above in Figure 3. One lead from the "Y" adapter must
plug into right channel input and the other lead must
plug into left channel input. As well, you must use the
10
860A Evolution
Series
Speaker
From Preamplifier
positive terminal of each output binding post (exactly
as in figure 3) for the loudspeaker connection. If you are
unsure about how to accomplish a bridged-mono mode
of operation, don't hesitate to contact your Authorized
MOON dealer.
The MOON 860A produces 800 watts of output power
at 8 ohms for a single channel when operating in
bridged-mono mode.