STANDARD FEATURES
The following features and items are standard on all Series 90PLUS Printers:
♦ Parallel interface – Centronics/IEEE-1284
♦ Internal Universal Power Supply (95 to 265 VAC)
♦ Operating controls and lights
•
•
•
•
•
♦ Paper low sensor
♦ Operator controlled self-test
♦ Cash drawer connector (RJ12) and driver (24V, 1.0 amp pulse for
approximately 150 ms; drawer open/closed status reporting)
♦ Nine-pin stored energy print head
♦ Short line seeking logic
♦ Characters and graphics
•
•
•
•
•
♦ Software controlled vertical spacing
♦ Snap-on ribbon cassette
♦ Steel receipt tear-off bar
Power on/off switch and indicator
Paper feed button
Forms release button
Resume button
Alarm and forms LEDs
Lower-case characters with descenders
340 characters per second bidirectional printing at 17 characters per
inch
42-column printing at 15 characters per inch
Emphasized and enhanced print
IBM® compatible all points addressable graphics
About The Series 90PLUS Printer
9