Ithaca Series 90 PLUS Operator's Manual page 48

38
Series 90PLUS Operator's Guide
7. If you are loading single-ply paper, continue with step 8.
If you are loading multiple-ply paper, separate the paper plies. The white
ply is always used for the receipt. Thread the journal ply (yellow) under the
cutter unit.
8. Insert the receipt paper through the slot in the cutter unit. The slot is
marked with a series of arrows.
9. Close the cutter unit.
10. Tear off the excess receipt paper.
If you are loading single-ply paper, continue with step 14.
9