26
Series 90PLUS Operator's Guide
CONNECTING THE POWER CORD
Caution: The printer must be grounded through the three-prong power
Back of
Printer
1. Be sure the power switch is turned off.
Back of
Printer
2. Connect the power cord to the power socket located on the back of the
printer and the external AC power source.
The power cord is in the supply envelope.
3. Turn the printer on.
The READY light turns green, indicating the printer is on.
Note: The printer takes about 1.5 seconds to begin operation.
connector. Do not use a ground defeating adapter.
Power
Switch
On Off
Power
Cord