Ithaca Series 90 PLUS Operator's Manual page 47

3
4
3. Place the roll in the printer so the paper unwinds from the bottom (front).
4. Open the cutter unit.
5
5. Slide the edge of the paper under the cutter unit and insert the paper
between the receipt roller and the paper load throat.
6. Turn the printer on, if it is not already on, and press the FEED button until
12 inches of paper are loaded.
With slight downward pressure, the paper feeds into the throat and around
the platen assembly.
2
Cutter
Unit
6
37
Setting Up the Printer