Standard Features; Optional Features - Ithaca PcOS series 90plus Maintenance Manual

6
Series 90PLUS Maintenance Manual

STANDARD FEATURES

The following features and items are standard on all Series 90PLUS printers:
♦
Centronics parallel interface with 2K buffer
♦
Internal international power supply (95 to 265 VAC)
♦
Operating controls and lights
Power ON/OFF switch and indicator
Paper feed button
Forms release button
Resume button
Alarm and form LED's
♦
Paper-low sensor
♦
Operator controlled self-test
♦
Cash drawer connector (RJ12) and driver (24V, 1.5 amp pulse for approximately 150 ms;
drawer open/closed status reporting)
♦
Nine-pin stored energy print head
♦
Short line-seeking logic
♦
Characters and graphics
Lowercase characters with descenders
300 characters per second bidirectional printing
42-column printing at 15 characters per inch
Emphasized and enhanced print
IBM compatible all-points-addressable (APA) graphics
♦
Software controlled vertical spacing
♦
Snap-on ribbon cassette
♦
Steel receipt tear-off bar

OPTIONAL FEATURES

The optional features either replace a standard feature or enhance the operation of the printer. All
optional features are installed at the factory and must be selected when the printer is ordered.
♦
RS-232C serial communication interface
♦
RS-422 serial communication interface
♦
Journal cover lock
♦
Custom colors and logo