40
Series 90PLUS Operator's Guide
REMOVING THE JOURNAL TAKE-UP ROLL
If you are changing multiple-ply paper, you must remove the journal take-up
roll before putting the supply roll in.
1. Open the paper cover.
2. Press the FEED button to advance the journal paper past the last journal
entry.
3. Lift the take-up spool from the printer, and cut the paper below the last
journal entry. Be sure that all entries are included.
4. Slide the printed journal off the take-up core and put it in a safe place.
If the paper sticks on the core, hold the paper, and twist the core in the
direction opposite the way the paper is wound.
2
3
4