General Descriptions; Series 90Plus Models; Standard Features; Receipt Printer - Ithaca PcOS 90Plus Series Programmer's Manual

Programmer's Guide
2

General Descriptions

2.1 Series 90PLUS Models

There are four basic models of the Series 90PLUS Printer. They are:
Model 91PLUS
Model 92PLUS
Model 93PLUS
Model 94PLUS

2.2 Standard Features

The following features are common to the entire family of printers:
•
340 cps logic-seeking print speed;
•
5 inches per second paper feed speed;
•
2.4 and 2.8 inch print zones;
•
Snap on ribbon cassettes;
•
Dual cash drawer drivers with status;
•
Centronics parallel, IEEE 1284 or serial RS-232C interfaces;
•
Configurable receiver buffers;
•
Standard and Epson command emulations
•
Standard all-points-addressable (APA) or EPOS bit-image graphics;
•
Standard and EPOS International Character Sets;
•
8, 10, 12, 15, 17.1, 20, and 24 characters per inch (cpi) selections;
•
Custom logo graphic print buffer in nonvolatile memory;
•
Emphasized, enhanced, double-wide, double-high, double-wide double-high, half-high, underline,
subscript, superscript, and rotated printing;
•
Operator-visible print zones;
•
Self-diagnostics; and
•
Setup and configuration utility programs.

2.3 Receipt Printer

The Model 91PLUS receipt printer only provides receipt functions. The last line printed on the receipt is
within 0.7 inch of the tear-off or cut-off edge of the receipt. The receipt printing appears right-side up with the
total at the bottom as the receipt appears from the top of the printer and is presented to the operator.
The receipt printer handles one-, two-, or three-ply paper. The optional cutter is able to cut one- and two-ply
paper.
1
Other emulation's can be made available. Contact Ithaca Peripherals' Sales Department for more information.
12/16/99
PcOS Series 90PLUS
Receipt printer;
Receipt/Journal printer;
Receipt/Journal/Validation printer; and
Receipt/Validation printer.
1
;
Rev M
General Descriptions
Page 3