Slip Printing - Ithaca Series 90 PLUS Operator's Manual

SLIP PRINTING

In slip printing, the form to be printed on is inserted into the front of the printer.
Slip printing is controlled by the printer.
1. The host system sends a slip transaction to the printer.
2. The printer opens the slip clamp, so a form can be inserted. The FORM
light flashes, and the READY light is ORANGE.
3. Insert the form into the printer.
Use the right slip guide rail to align the form. Then push the form all the
way in until the READY light turns green.
When the READY light changes from orange to green, the form is properly
positioned, and the printer clamps the form automatically.
Operating the Printer
Ready
Light
Slip
Guide
Rail
57