Planet Networking & Communication WNRT-617 User Manual page 63

For example: If you desire that the wireless station A with MAC address 00-30-4F-11-22-33 and the
wireless station B with MAC address 00-30-4F-1A-2B-3C are able to access the Router, but all the
other wireless stations cannot access the Router, you can configure the Wireless MAC Address
Filtering list by following these steps:
Step 1. Click the Enable button to enable this function.
Step 2. Select the radio button: Deny the stations not specified by any enabled entries in the list
to access for Filtering Rules.
Step 3. Delete all or disable all entries if there are any entries already.
Step 4. Click Add
the
/00-30-4F-1A-2B-3C in the MAC Address field, then enter wireless station A/B in the
Description field, while select Enabled in the Status pull-down list. Finally, click the Save and
the Back button.
The filtering rules that configured should be similar to the following list:
New...
button and
Figure 5-27
-56-
User's Manual of WNRT-617
enter the MAC address 00-30-4F-11-22-33