Planet Networking & Communication WNRT-617 User Manual page 140

1. Sometimes the connection cannot be disconnected although you specify a
time to Max Idle Time, since some applications is visiting the Internet
continually in the background.
2. If you are a Cable user, please configure the Router following the above
steps.
2. How do I configure the Router to access Internet by Ethernet users?
1) Login to the Router, click the "Network" menu on the left of your browser, and click "WAN"
submenu. On the WAN page, select "Dynamic IP" for "WAN Connection Type", finish by
clicking "Save".
2) Some ISPs require that you register the MAC Address of your adapter, which is connected to
your cable/DSL Modem during installation. If your ISP requires MAC register, login to the
Router and click the "Network" menu link on the left of your browser, and then click "MAC
Clone" submenu link. On the "MAC Clone" page, if your PC's MAC address is proper MAC
address, click the "Clone MAC Address" button and your PC's MAC address will fill in the
"WAN MAC Address" field. Or else, type the MAC Address into the "WAN MAC Address" field.
The format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will
take effect after rebooting.
Figure A-2 PPPoE Connection Mode
-133-
User's Manual of WNRT-617