Planet Networking & Communication WNRT-617 User Manual page 106

The page includes the following fields:
Object
Description
Egress bandwidth
Ingress bandwidth
Enable
Modify
To add/modify a Bandwidth Control rule, follow the steps below.
Step 1: Click Add New... shown in
Step 2: Enter the information like the screen shown below.
Figure 5-54 Bandwidth Control Rules List
This is the information about the rules such as address range.
This field displays the max and mix upload bandwidth through the WAN
port, the default is 0.
This field displays the max and mix download bandwidth through the
WAN port, the default is 0.
This displays the status of the rule.
Click Modify to edit the rule. Click Delete to delete the rule.
Table 5-37
Figure 5-54, you will see a new screen shown in
-99-
User's Manual of WNRT-617
Description
Figure 5-55.