Planet Networking & Communication WNRT-617 User Manual page 27

Click Next, and then WAN Connection Type page will appear, shown in
Step 3. Select Auto-Detect, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
If the connection type detected is PPPoE, the next screen will appear as shown in
Enter the User Name and Password provided by your ISP. These fields are case-sensitive. If
you have difficulty with this process, please contact your ISP.
If the connection type detected is Static IP, the next screen will appear as shown in
Enter the parameters in the corresponding blanks.
Figure 4-13
Figure 4 -14 Quick Setup – PPPoE
-20-
User's Manual of WNRT-617
Figure 4-13.
Figure 4-14.
Figure 4-15.