Planet Networking & Communication WNRT-617 User Manual page 38

Method Two: Enter the PIN of the Router into the configuration utility of your Wireless adapter
Step 1: Get the Current PIN code of the Router in
Step 2: For the configuration of the wireless adapter, please choose the option that you want to
enter the PIN of the Router in the configuration utility of the Wireless adapter, and enter it
into the field. Then click Next.
The default PIN code of the Router can be found in WPS configuration screen as
Figure 5-3.
Step 3. You will see the following screen when the new device has successfully connected to the
network.
1)
The WPS LED on the Router will light green for about 5 minutes if the device has
been successfully added to the network.
2) The WPS function cannot be configured if the Wireless Function of the Router is
disabled. Please make sure the Wireless Function is enabled before configuring
the WPS.
User's Manual of WNRT-617
Figure 5-3 (each Router has its unique PIN code).
Figure 5-7
-31-