If the above configuration takes effect, you can configure the Router by typing
http://192.168.1.1:88
the address field of the Web browser.
3)
Log in to the Router, click the "Forwarding" menu on the left of your browser, and click the
"Virtual Servers" submenu. On the "Virtual Servers" page, click Add New..., then on the
"Add or Modify a Virtual Server" page, enter "80" into the blank next to the "Service Port",
and your IP address next to the "IP Address", assuming 192.168.1.188 for an example,
remember to Enable and Save.
Figure A-8 Remote Management
(the Router's LAN IP address: Web Management Port) in
Figure A-9 Virtual Servers
-137-
User's Manual of WNRT-617