3.
I want to use Netmeeting, what do I need to do?
1)
If you start Netmeeting as a host, you don't need to do anything with the Router.
2)
If you start as a response, you need to configure Virtual Server or DMZ Host and make sure
the H323 ALG is enabled.
3)
How to configure Virtual Server: Log in to the Router, click the "Forwarding" menu on the left
of your browser, and click "Virtual Servers" submenu. On the "Virtual Servers" page, click
Add New.... Then on the "Add or Modify a Virtual Server Entry" page, enter "1720" for the
"Service Port" blank, and your IP address for the "IP Address" blank, taking 192.168.1.169 for
an example, remember to Enable and Save.
Figure A-3 MAC Clone
Figure A-4 Virtual Servers
-134-
User's Manual of WNRT-617