Table of Contents
Advertisement
S u b C o m p a c t B o a r d
information.
4.
After you have made your selections and the configuration is
what you want, press <ESC>. A prompt will appear asking if
you want to save the configuration. Press "Y" if you want to
save.
There are three very useful diagnostic functions offered in the
Ethernet Setup Menu as follows:
1. Run EEPROM test
2. Run Diagnostics on Board
3. Run Diagnostics on Network
Each option has its own display screen, which shows the format
and result of any diagnostic tests undertaken.
4.8 Installing Audio Driver
Win XP / Win XPe Audio
Place the Driver CD-ROM into your CD-ROM drive and follow the
steps below to install.
1. Click on Start button.
2. Click on Settings button.
3. Click on Control Panel button.
4. Click on System button.
5. Select Hardware and click on Device Manager....
6. Double click on Multimedia Audio Controller.
7. Click on Update Driver....
Chapter 4 Driver Installation
4 - 8
G E N E - 5 3 1 5
Advertisement
Table of Contents
