Terbly Beam 2R User Manual page 26

8.7.1 User mode
With this function, you can create user defined channel orders.
8.7.2 Edit User mode
With this function, you can adjust the rest user defined channel order.
1．Tap <MODE/ESC>button， access the main menu， Tap the <Up/Down>button until"Users
mode set"is displayed. Press ENTER, the display will show "Edit User Moed".
2．The display show "User Mode"frist channel, Press <Up/Down> the display will show
"Edit User Mode".
3．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.8 Edit program
8.8.1 Select program
With this function, you can select the program for the Program Run.
8.8.2 Edit program
With this function, you can edit the internal programs.
8.8.3 Edit scenes
With this function, you can edit the scenes of the internal programs.
8.8.4 Auto scenes rec.
The moving head features an integrated DMX-recorder by which you can transmit the
programmed scenes from your DMX-controller to the moving head. Adjust the desired scene
numbers via the encoder (from – to). When you call up the scenes at your controller, they will
automatically be transmitted to the moving head.
Excursion:
A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start
3 different Slave units, which run 3 different programs. The Master unit sends the 3 program
parts in a continuous loop.
The Slave unit receives data from the Master unit according to the group which the Slave unit
was assigned to. If e.g. a Slave unit is set to "Slave 1" in the menu "Set to Slave", the Master unit
sends "Auto Program Part 1" to the Slave unit. If set to "Slave 2", the Slave unit receives "Auto
Program Part 2".
To start a Auto Program please proceed as follows:
1. Slave-Setting
• Select "Function Mode" by turning the encoder.
• Press the Enter button to confirm.
• Select "Set to slave" by turning the encoder.
• Press the Enter button to confirm.
- 25 - XM974-V1.0-NR