Terbly Beam 2R User Manual page 24

5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.4.4 Temperature C/F
With this function, Display the temperature for Celsius or Fahrenheit.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality".
2．Press <Up/Down>, the display will show "Temperature C/F".
3．Press< ENTER>, the display will show "Temperature C/F".
4．The display show "Celsius
5．",Press <Up/Down>, the display will show "Fahrenheit".
6．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.4.5 Initial Status
With this function, Display initial effect position.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality".
2．Press <Up/Down>, the display will show "Initial status".
3．Press< ENTER>, the display will show "Initial status".
4．The display show "XXX".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.4.7 Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality".
2．Press <Up/Down>, the display will show "Reset Default".
3．Press< ENTER>, the display will show "Reset Default".
4．The display show "OFF",Press <Up/Down>, the display will show "ON".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.5 Reset-function
With this function you can reset the device via the Control Board. You can select the different
reset functions by turning the encoder.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Reset-functions"is displayed. Press ENTER, the display will show "Reset-functions".
2．The display show "Reset All", Press
Pan/Tilt" ， "Reset Colors", "Reset Gobos", "Reset Shutter", " Reset Other ".
3．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
<Up/Down>, the display will show "Reset
- 23 - XM974-V1.0-NR