Error Message - Terbly Beam 2R User Manual

0-19
20-29
30-39
40-59
60-79
80-84
85-87
88-90
91-93
94-96
97-99
100-119 Internal program 1
120-139 Internal program 2
140-159 Internal program 3
160-179 Internal program 4
180-199 Internal program 5
200-219 Internal program 6
220-239 Internal program 7
240-255 Auto program by music
11 15
0-255
12 16
0-255

10. ERROR MESSAGE

When you turn on the fixture, it will make a reset at first. The display may show"Err channel is
XX" while there are problems with one or more channels. "XX" stands for channel 1, 2, 3, 4, 5,
6 who has the testing sensor for positioning. For example, when the display shows "Err channel is
Color wheel", it means there is some error in channel 13. If there are some errors on channel 1,
channel 5, channel 6 at the same time, you may see the error message "Err channel is Color
wheel", "Err channel is Pan movement", "Err channel is Tilt movement", flash repeated for 2
times, and then the fixture will generate a second reset. If the fixture remain error message after
performing reset more than 2 times, only the channels which have errors can not work properly,
others can work as usual. Please contact with dealer or manufacturer for service, self repair is not
allowed.
01Er
(Color wheel- error) This message will appear after the reset of the fixture if the magnetic-indexing circuit
colour change normal
colour change to any position
colour & gobo change to any position
Lamp on
Lamp switch off
All motor reset
Scan motor reset
Colors motor reset
Gobo motor reset
Shutter & Dimmer motor reset
Other motor reset
Pan Fine 16bit
Fine control of Pan movement
Tilt Fine 16bit
Fine control of Tilt movement
- 30 - XM974-V1.0-NR