Terbly Beam 2R User Manual page 13

Edit User Mode
Select Programs
Edit Program
Edit Scenes
Rec. Controller
8.1 FUNCTION
8.1.1 Set DMX Address
With this function, you can adjust the desired DMX-address via the Control Board.
1． Access the main menu.
2． Tap the <Up/Down>button until"Set DMX Address"is displayed.
3． Press ENTER, the display will show "Set DMX Address".
4． Tap the <Up/Down>button，the display will show "A001~AXXX"
5． Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.2 DMX Value
With this function you can display the DMX 512 value of each channel. The display
automatically shows the channel with a value changing.
1．Access the main menu.
2．Tap the <Up/Down>button until"DMX Value"is displayed.
3．Press ENTER, the display will show "DMX Value".
4．Tap the <Up/Down>button，choose each channel.
5．Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
8.1.3 Slave Mode
With this function, you can define the device as slave.
1．Access the main menu.
2．Tap the <Up/Down>button until"Slave Mode"is displayed.
3．Press ENTER, the display will show "Slave Mode".
4．Tap the <Up/Down>button，the display will show "Slave1", "Slave2", "Slave3".
5．Press ENTER to confirm or press <MODE/ESC> to return to the main menu.
Max Channel = XX
PAN = CH01
:
Auto Pro Part 1 = Program 1 ~ 10 Program 1
Auto Pro Part 2 = Program 1 ~ 10 Program 2
Auto Pro Part 3 = Program 1 ~ 10 Program 3
Program 1 Program Test
: Step 01=SCxxx
Program 10 Step 64=SCxxx
Pan,Tilt,......
Edit Scene 001 --Fade Time--
~ Edit Scene 250 --Secne Time--
Input By Exterior
XX~XX
- 12 -
Preset User modes
Select programs to be
run
Testing program
Program in loop
Save and exit
Save and automatically
return
manual scenes edit
Automat. scenes rec
XM974-V1.0-NR