Terbly Beam 2R User Manual page 25

8.6 Effect Adjust
8.6.1 Test channel
With this function you can test each channel on its (correct) function.
1．Tap <MODE/ESC>button， access the main menu， Tap the <Up/Down>button until"Effect
Adjust"is displayed. Press ENTER, the display will show "Effect Adjust".
2．Press <Up/Down>, the display will show "Test Channel".
3．Press< ENTER>, the display will show "Test Channel".
4．The display show "Pan Moving"frist channel, Press <Up/Down>, can choose other
channel.
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.6.2 Manual control
With this function, you can adjust the lamp more easily. All effects will be canceled, the shutter
opens and the dimmer intensity will be set to 100 %. With the individual functions, you can
focus the light on a flat surface (wall) and erform the fine lamp adjustment.
1．Tap <MODE/ESC>button， access the main menu， Tap the <Up/Down>button until"Effect
Adjust"is displayed. Press ENTER, the display will show "Effect Adjust".
2．Press <Up/Down>, the display will show "Manual control".
3．Press< ENTER>, the display will show "Manual control".
4．The display show "PAN=XXX".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.6.3 Calibration
With this function, you can calibrate and adjust the effect wheels to their correct positions. The
password of calibrate values is 050.
1．Tap <MODE/ESC>button， access the main menu， Tap the <Up/Down>button until"Effect
Adjust"is displayed. Press ENTER, the display will show "Effect Adjust".
2．Press <Up/Down>, the display will show "Calibration".
3．Press< ENTER>, the display will show "Calibration".
4．The display show "Password=XXXX".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.7 Users mode set
In this menu, user can select different channels list by different sequence:
For example, after the user enter this manual, if select Auto Program = CH 22, means in this
User's mode, the "Dimmer" is in Channel 16.
- 24 - XM974-V1.0-NR