Terbly Beam 2R User Manual page 20

8.4 PERSONALITY
8.4.1 Status settings
Address via DMX
With this function, you can adjust the desired DMX-address via an external controller.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality". Tap the
<Up/Down>button until the display will show "Status setting". Press ENTER, the
display will show "Status setting".
2．Press <Up/Down>, the display will show "Address via DMX".
3．Press< ENTER>, the display will show "Address via DMX".
4．The display show "ON",Press <Up/Down>, the display will show "OFF".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
No DMX Status
With this function, when the drive is not DMX signal, it runs automatism, close, hold and
music, the default is hold.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality". Tap the
<Up/Down>button until the display will show "Status setting". Press ENTER, the
display will show "Status setting".
2．Press <Up/Down>, the display will show "No DMX Status".
3．Press< ENTER>, the display will show "No DMX Status".
4．The display show "Hold",Press <Up/Down>, the display will show "Close", "Auto",
"Music".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Pan Reverse
With this function you can reverse the Pan-movement.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality". Tap the
<Up/Down>button until the display will show "Status setting". Press ENTER, the
display will show "Status setting".
2．Press <Up/Down>, the display will show "Pan Reverse".
3．Press< ENTER>, the display will show "Pan Reverse".
4．The display show "OFF",Press <Up/Down>, the display will show "ON".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Tilt Reverse
- 19 - XM974-V1.0-NR