Terbly Beam 2R User Manual page 21

With this function you can reverse the Tilt-movement.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality". Tap the
<Up/Down>button until the display will show "Status setting". Press ENTER, the
display will show "Status setting".
2．Press <Up/Down>, the display will show "Tilt Reverse".
3．Press< ENTER>, the display will show "Tilt Reverse".
4．The display show "OFF",Press <Up/Down>, the display will show "ON".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Pan Degree
With this function, you can select pan degree for 630 or 540.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality". Tap the
<Up/Down>button until the display will show "Status setting". Press ENTER, the
display will show "Status setting".
2．Press <Up/Down>, the display will show "Pan Degree".
3．Press< ENTER>, the display will show "Pan Degree".
4．The display show "540",Press <Up/Down>, the display will show "630", "540-90
offset".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Feedback
With this function, you can feedback switch of pan movement or tilt movement.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality". Tap the
<Up/Down>button until the display will show "Status setting". Press ENTER, the
display will show "Status setting".
2．Press <Up/Down>, the display will show "Feedback".
3．Press< ENTER>, the display will show "Feedback".
4．The display show "ON",Press <Up/Down>, the display will show "OFF".
5．Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Movement Speed
With this function, you can select scan mode from 1 to 4.
1．Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until
"Personality"is displayed. Press ENTER, the display will show "Personality". Tap the
<Up/Down>button until the display will show "Status setting". Press ENTER, the
- 20 - XM974-V1.0-NR