Clean Lamp Time
With this function you can clear the running time of the lamp. Please clear the lamp time
every time you replace the lamp.
1.Tap <MODE/ESC>button,access the main menu,Tap the <Up/Down>button until
"Information"is displayed. Press ENTER, the display will show "Information". Tap the
<Up/Down>button until the display will show "Time Information". Press ENTER, the
display will show "Time Information".
2.Press <Up/Down>, the display will show "Clean Lamp Time".
"Timer Password"menu input a correct password,
At
3.
"Clean Lamp Time",
4.The display will show "OFF"or"ON".
5.Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.2.2 Temperature Info
Head Temperature
With this function you can display the temperature on the display board of the base (near
CMY-filter) in Celsius.
1.Tap <MODE/ESC>button,access the main menu,Tap the <Up/Down>button until
"Information"is displayed. Press ENTER, the display will show "Information". Tap the
<Up/Down>button until"Temperature Info"is displayed. Press ENTER, the display will
show "Temperature Info".
2.Press <Up/Down>, the display will show "Head Temperature".
3.Press< ENTER>, the display will show "Head Temperature".
4.The display show "XXX °C/ °F".
5.Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.2.3 Software version
With this function, you can display the software version of the device.
1.Tap <MODE/ESC>button,access the main menu,Tap the <Up/Down>button until
"Information"is displayed. Press ENTER, the display will show "Information".
2.Press <Up/Down>, the display will show "Software version".
3.Press< ENTER>, the display will show "Software version".
4.The display show "Ver x.x......".
5.Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
8.3 LAMP CONTROL
When the real temperature around the lamp is higher than the preset value, the lamp will be shut
down in 5 minutes automatically.
·When the LCD display shows "Off", it means the lamp must be turned on again manually;
·When the LCD display shows "Hot", it means the actual temperature around the lamp is still
press< ENTER>, the display will show
- 16 -
XM974-V1.0-NR