Using Computer Setup (F10) Utility To Reset Cmos - HP Z1 Maintenance And Service Manual

Using Computer Setup (F10) Utility to reset CMOS

1. Access Computer Setup (F10) Utility menu.
2. When the computer setup message appears in the lower-right corner of the screen, press F10,
and then press
If you do not press
access this utility.
3. From Computer Setup (F10) Utility menu, select File > Default Setup.
This restores the settings that include boot sequence order and other factory settings. However,
it does not force hardware rediscovery.
4. Choose Restore Factory Settings as Default, and then press
5. Select File > Apply Defaults and Exit, and then press
6. Reset the computer passwords and configuration information, such as the system date and time.
NOTE:
Enter to bypass the title screen, if necessary.
F10 while the message is displayed, the computer must be rebooted to
This step does not clear the passwords.
F10 to accept.
Enter to accept.
Clearing and resetting the CMOS 93