Download  Print this page

Status Tab; History Tab - HP Z1 Maintenance And Service Manual

Hide thumbs


Select the Test tab.
Select the type of tests you want to run: Quick, Complete, or Custom.
Include optional interactive tests by selecting Include interactive tests.
Choose how you want the test to be executed, either Number of Loops or Total Test Time.
When choosing to run the test over a specified number of loops, enter the number of loops to
perform. If you want the diagnostic test for a specified time period, enter the amount of time in
Click the Start Test button to start the testing. The Status tab, which allows you to monitor the
progress of the tests, is automatically displayed during the testing process. When the tests are
complete, the Status tab shows whether the devices passed or failed.
If errors are found, go to the Errors tab to display detailed information and recommended

Status tab

The Status tab shows the overall progress and status of the test scenario as well as the progress and
status of each test. The color coded status are black, blue, green, red, and orange.
The Status tab colors are:
Waiting (black) — No test is running.
Running (blue) — At least one test is currently running.
Passed (green) — All tests have run successfully, meaning that no hardware error or defect was
Failed (red) — The tests have detected at least one error with your system.
Canceled (orange) — The test scenario has been explicitly canceled, in which case no pass or
fail conclusion can be drawn.
The available data is:
Current Loop — Shows the current execution loop out of total number of loops specified in the
Test panel.
Test Time — Shows the total time elapsed since the beginning of the test execution.
Test Complete — Shows the number of tests successfully completed out of the total number of
test to execute.
Cancel button — Push the Cancel button to immediately terminate all currently running tests.

History tab

The History tab shows the history of the past test executions.
The History Log displays all tests that have been executed, the number of times of execution, the
number of times failed, the date each test was executed, and the time it took to complete each test.
The Clear History button will clear the contents of the History Log.
The contents of the History Log may be saved as a HTML file to either floppy or USB flash drive by
clicking the Save button.
Chapter 4 Diagnostics and troubleshooting


Table of Contents

   Also See for HP Z1

   Related Manuals for HP Z1

Comments to this Manuals

Symbols: 0
Latest comments: