Using Computer Setup (F10) Utility To Reset Cmos - HP Z440 Workstation Series Maintenance And Service Manual

Using Computer Setup (F10) Utility to reset CMOS

1. Access Computer Setup (F10) Utility menu.
2. When Computer Setup message appears in the lower-right corner of the screen, press F10, and then
press Enter
If you do not press
utility.
3. From Computer Setup (F10) Utility menu, select Main > Replicated Setup > Restore current settings
from USB device.
This restores the settings that include boot sequence order and other factory settings. However, it does
not force hardware rediscovery.
4. Choose Restore Factory Settings as Default, and the press
5. Select Main > Apply Defaults and Exit, and then press
6. Reset the computer passwords and configuration information, such as the system date and time.
NOTE:
to bypass the title screen, if necessary.
F10 while the message is displayed, the computer must be rebooted to access this
This step does not clear the passwords.
F10 to accept.
F10 to accept.
Clearing and resetting the CMOS 101