Using Computer Setup (F10) Utility To Reset Cmos - HP Z1 G2 Maintenance And Service Manual

Using Computer Setup (F10) Utility to reset CMOS

1. Access Computer Setup (F10) Utility menu.
2. When the computer setup message appears in the lower-right corner of the screen, press F10, and then
press
If you do not press
utility.
3. From Computer Setup (F10) Utility menu, select File, and then select Default Setup.
This restores the settings that include boot sequence order and other factory settings. However, it does
not force hardware rediscovery.
4. Choose Restore Factory Settings as Default, and then press
5. Select File > Apply Defaults and Exit, and then press
6. Reset the computer passwords and configuration information, such as the system date and time.
NOTE:
74 Chapter 5 Configuring password security and resetting CMOS
Enter to bypass the title screen, if necessary.
F10 while the message is displayed, the computer must be rebooted to access this
This step does not clear the passwords.
Enter to accept.
Enter to accept.