Ducati Scrambler Owner's Manual page 88

Setting the units of measurement:
Temperature
This function allows you to change the units of
measurement of the Air Temperature indications.
To gain access to this function enter the SETTING
MENU, use buttons (1) and (2) to select UNITS and
press button (4).
Select TEMP option, by pressing button (1) or (2).
Once TEMP. function is highlighted, press CONFIRM
MENU button (4).
When entering the function, units of measurement
(°C, °F) are indicated: current unit of measurement is
flashing while the other available unit is not flashing.
Press buttons (1) and (2) to highlight the units of
measurement one by one: in particular, use button (1)
to highlight the following item and button (2) to
highlight the previous item. Select the required unit
of measurement and then press the CONFIRM
MENU button (4) to confirm the selected unit; then
the selected unit of measurement is saved in the
instrument panel and the "TEMP." indication starts
flashing again.
Press button (2) to make the EXIT box flash; press
button (4) to quit and go back to the previous window.
- °C: if this unit is set, the following values will have
the same units of measurement:
1) T – AIR: °C
- °F: if this unit is set, the following values will have
the same units of measurement:
1) T – AIR: °F
87