Changing The Pin Code - Ducati Scrambler Owner's Manual

Changing the PIN CODE

To change the existing PIN CODE and activate a new
one, you must open the SETTING MENU.
Select PIN CODE option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU
button (4).
Note
If upon accessing this function, the "N : " (New)
and four flashing dashes "- - - -" are shown, it means
that the PIN CODE has never been activated and it is
necessary to do it.
When accessing the function, the display will show
"O: " (old) followed by four flashing dashes "- - - -".
Note
To change the PIN CODE, you must know the
already stored PIN.
To go back to the previous indication without
modifying the PIN CODE, press button (2); as soon
as the "EXIT" box starts flashing, press button (4)
again.
Entering the "old" code:
78
1) Press button (4), only one digit indicating "0"
starts flashing;
2) Each time you press button (2) the displayed
number increases by one (+ 1) up to "9" and then
starts back from "0";
3) Each time you press the button (1) the displayed
number decreases by one (- 1) up to "1" and then
starts back from "0";
4) To confirm the number, press the button (4);
Repeat the procedures until you confirm all the digits
of the PIN CODE.