Electrical Components; Electrical System - VESPA GTV 125 Service Station Manual

Vespa GTV 125
Transmission
Specification
Transmission
Capacities
Specification
Engine oil
Fuel tank (including a ~ 2 l reserve)
Rear hub
Cooling system fluid

Electrical system

Specification
Type of ignition
Variable ignition advance (before TDC)
Spark plug
Battery
Generator
Frame and suspensions
Specification
Front suspension
Front shock absorber axial travel
Rear suspension
Rear shock absorber axial travel
TRANSMISSION
CAPACITY

ELECTRICAL COMPONENTS

FRAME AND SUSPENSIONS
Type
Desc./Quantity
Automatic expandable pulley variator with torque
server, V belt, automatic clutch, gear reduction unit
and transmission housing with forced air circula-
tion cooling
Desc./Quantity
~ 1000 cm³
~ 9.5 l
150 cm³
~ 2.100 ÷ 2.150 l
Desc./Quantity
Electronic capacitive discharge ignition, with vari-
able timing and separate HV coil
10° ± 1° at 2000 rpm
Champion RG 4 HC
Sealed, 12 V / 10 Ah
alternating current
Desc./Quantity
Unitised body made of stamped plate
Single arm suspension (cantilever wheel) fitted
with a double-acting hydraulic shock absorber with
coaxial spring
86.5 mm
Engine with swinging fork attached to frame by
means of an arm with 2 degrees of freedom Pair
of double-acting hydraulic shock absorbers and
coaxial springs with preloading adjustment in 4
positions.
89.5 mm
Characteristics
CHAR - 5