Radiator Fan - VESPA GTV 125 Service Station Manual

Vespa GTV 125

Radiator fan

- In order to carry out any operation on the radiator
unit, flow out the coolant in the coolant delivery
pipe in the pump, indicated in the photograph.
- Remove the shield back plate;
- Remove the coolant feed and return hoses from
the right radiator;
- Unscrew the 4 screws fixing the radiator to the
body;
- Detach the radiator
- Detach the pipe from the plastic duct by removing
the plastic clip shown in the photograph. Then re-
move the duct.
- The same procedure also applies to the left ra-
diator for which it is necessary to remove the elec-
trical fan first by undoing the 3 screws indicated in
the photograph.
To refit, perform the removal operations but in reverse order being careful when positioning the news
clips for the fluid hoses and when filling the cooling system.
Chassis
CHAS - 15