Safety Locks - VESPA GTV 125 Service Station Manual

Pre-delivery
Carry out the listed tests before delivering the vehicle.
Warning- be very careful when handling fuel.
Aesthetic inspection
Appearance checks:
- Paintwork
- Fitting of plastics
- Scratches
- Dirt
Tightening torques inspection
• Safety Locks • Cover retaining screws
Name
Shock absorber upper fixing: rear
Shock absorber bottom fixing: rear
Left shock absorber lower support bolts
Front wheel axle nut
Rear wheel axle nut
Rear brake disc bolts
swinging arm bolt - chassis
Engine swinging arm bolt
Handlebar clamping bolts
Upper steering ring nut
Lower steering ring nut
Electrical system
• Main switch
• Lights: high beams, low beams, side/taillights (front and rear) and relevant warning lights
- Regulating the headlights according to the regulations currently in force
• Front and rear stop light buttons and relative light •Turn indicators and relative telltales
• Instrument lighting
• instruments: fuel and temperature indicator
•Instrument panel lights
• Horn
• Electrical start up
• Engine stop by emergency stop switch and side stand
• Electrical saddle opening button
CAUTION
TO ENSURE MAXIMUM PERFORMANCE, THE BATTERY MUST BE CHARGED BEFORE USE.
INADEQUATE CHARGING OF THE BATTERY WITH A LOW LEVEL OF ELECTROLYTE BEFORE
IT IS FIRST USED SHORTENS THE LIFE OF THE BATTERY.
PRE DE - 2

SAFETY LOCKS

Vespa GTV 125
Torque in Nm
20 to 25 N•m
33 to 41 N•m
20 ÷ 25
75 ÷ 90
104 ÷ 126
11 ÷ 13
76 ÷ 83 Nm
64 ÷ 72 Nm
45 ÷ 50 Nm
30 ÷ 40
8 ÷ 10