Details - NEC EXPRESS5800/140He Service Manual

10.2.3

Details

<Before replacing the I/O board>
11. Start EXPRESSBUILDER, and select [Tool] → [Off-line Maintenance Utility].
12. Select [System Information Management]. The window shown below appears.
System Information Management
Save
Save RMC Data
Administrator Menu
Return to the previous menu
13. Select [Save]. After that, make a backup copy onto the floppy disk according to the
instructions in the window.
14. When the [Save] operation has successfully completed, select [Save RMC Data] to make
a backup copy onto the floppy disk. You can use the same floppy disk used in step 3.
System Information Management
Save
Save RMC Data
Administrator Menu
Return to the previous menu
<After replacing the I/O board>
1. Start EXPRESSBUILDER, and select [Tool] → [Off-line Maintenance Utility].
2. Select [System Information Management]. The window shown below appears.
System Information Management
Save
Save RMC Data
Administrator Menu
Return to the previous menu
3. Select [Administrator Menu]. The messages shown below appear.
Administrator Menu
Attention!
Do not use the Administrator Menu except the maintenance staffs.
Do you want to use the menu?
Yes:[Enter] No:[ESC]
- -
150