NEC EXPRESS5800/140He Service Manual page 37

8 I/O board error lamp
9 Processor board error lamp
10 BMC error lamp
11 1000/100/10 lamp
12 LAN connector
Used to connect with a network system on LAN.
The number following the bold-faced character shows the port number.
13 LINK/ACT lamp
14 ICMB connector
Used to connect a device having the ICMB interface. The number following the bold-faced
character shows the port number.
15 Management LAN (A-BMC) port
16 USB-1 - USB-2 connectors
The USB-1 (upper) and USB-2 (lower) connectors are connected with devices accepting
the USB interface (2.0).
17 Monitor connector
The monitor connector is connected with the display unit.
18 Serial port B connector
To be used exclusively with the serial port B connector on the front panel.
19 Serial port A connector
The serial port A connector is connected with a device having the serial interface.
The server can't directly be connected to a leased line through the connector.
20 Keyboard connector
Used to connect with the optional keyboard.
21 Mouse connector
Used to connect with the optional mouse.
22 Printer port connector
Used to connect with a printer with the Centronics interface.
23 UID lamp
- -
21