NEC EXPRESS5800/140He Service Manual page 158

[Errors no remote KVM console]
No. Error message
1 The remote KVM console is
invalidated unsuccessfully.
2 The remote KVM console is
validated unsuccessfully.
3 KVM packets are sent
unsuccessfully.
4 The KVM request is aborted.
5 UDP packets are sent
unsuccessfully.
6 The remote KVM console is
unavailable because it is
made invalid.
7 The remote KVM console is
already used by another
client.
8 The remote KVM console is
terminated unsuccessfully.
9 The BMC configuration is set
unsuccessfully.
10 The UDP connection is
closed.
[Errors on system event log (SEL) display]
No. Error message
1 The BMC SEL is cleared
unsuccessfully.
2 The SEL is acquired
unsuccessfully.
[Errors on sensor device report (SDR) display]
No. Error message
1 The SDR is acquired
unsuccessfully.
Action
After checking the network environment, retry the
operation. If the operation fails several times, replace
the Management LAN Card. If the error still occurs,
replace the I/O Board.
This does not indicate a specific error. Click [OK] to
close the message dialog box.
After checking the network environment, retry the
operation. If the operation fails several times, replace
the Management LAN Card. If the error still occurs,
replace the I/O Board.
Make the Remote KVM Console effective (permitted)
following the User's guide.
After the client now using the Remote KVM Console
terminates, retry the operation.
Use the Remote KVM Console after three minutes or
longer have passed.
After checking the network environment, retry the
operation. If the operation fails several times, replace
the Management LAN Card. If the error still occurs,
replace the I/O Board.
Action
This may be caused by network congestion. Retry
the operation. If the operation fails several times,
replace the Management LAN Board. If the error still
occurs, the BMC may be defected. Replace the I/O
Board.
Action
This may be caused by network congestion. Retry
the operation. If the operation fails several times,
replace the Management LAN Board. If the error still
occurs, the BMC may be defected. Replace the I/O
Board.
- -
142