Battery Status Check By Megaraid Configuration Utility - NEC EXPRESS5800/140He Service Manual

8.5.3

Battery Status Check by MegaRAID Configuration Utility

Starat the MegaRAID Configuration Utility and select [Objects]→[Adapter]→[Battery
Information]. Then the battery status appears as follows.
Item Meaning
Back Up Presence of
Module battery module
Battery Pack Presence of
battery pack
Temperature Temperature
status
Voltage Voltage status
Fast Fast charge
Charging status
No of Cycles Number of fast
charge cycles
NOTE: The defined battery life is two years or 500 charge
cycles. If a battery is charged for more than 500, it is
determined that its life has come to an end. Replace the
battery.
The new battery is not charged. The battery is charged fully
by continuous operation about six hours after the Server has
started.
Indication Action
PRESENT None
ABSENT Check the installation of the battery
module.
Replace the battery module.
PRESENT None
ABSENT Check the installation of the cable coming
out of the battery pack.
Replace the battery module.
GOOD None
HIGH Check fans.
Replace battery module.
GOOD None
BAD Check the installation of the battery
module.
Replace battery module.
COMPLETED None
IN_PROGRESS None. However, replace the battery module
if this status continues for longer then eight
hours.
(Numerical Replace the battery if the value exceeds
characters) 500.
- -
139